How To Make A Feeding Bowl For A Cat?

Table of contents:

How To Make A Feeding Bowl For A Cat?
How To Make A Feeding Bowl For A Cat?

Video: How To Make A Feeding Bowl For A Cat?

Video: How To Make A Feeding Bowl For A Cat?
Video: Pet Food Bowl Stand from Pallets - Cat Small Dog Feeder Station 2024, November
Anonim

Many useful things can be poured out of alabaster that can be used in everyday life: flower vases, hot coasters, fridge magnets, flower pots. And once it was decided to make a bowl for the cat - for crackers.

How to make a feeding bowl for a cat?
How to make a feeding bowl for a cat?

It is necessary

  • 1. Two buckets of mayonnaise
  • 2. Large enema or ball
  • 3. Double-sided and regular scotch tape
  • 4. Technical oil
  • 5. Alabaster
  • 6. Starch
  • 7. Stationery glue
  • 8. Polymer glue Prestige

Instructions

Step 1

Take a bucket of mayonnaise and cut the top and bottom horizontally with a clerical knife and scissors, as well as vertically.

Take the second bucket and place it upside down. Wrap with double-sided tape.

Then we fix the first bucket on double-sided tape.

Now we will wrap it with ordinary tape below and across.

Image
Image

Step 2

Then thoroughly mix water and stationery glue in a 1: 1 ratio and add alabaster and starch one spoon at a time (for better thickening), stirring thoroughly so that there are no lumps. The ratio of alabaster to starch should be 3: 1 somewhere. It is necessary to add and stir until the state of liquid sour cream.

Image
Image

Step 3

Take a large enema (they are also called syringes) or a ball and cut off the top at the widest part. Then we will lubricate our form (from an enema) with technical oil.

Image
Image

Step 4

Place the first bucket inside - the distance between the walls of the enema and the bucket should be half a centimeter somewhere. Then fill the first bucket with the prepared mixture by a third and put there an enema with a load, like a magnet. Then add our mixture to the edges of the form (from the enema). It is necessary to ensure that the walls are uniform and uniform in thickness.

Image
Image

Step 5

Now we will wait a day until the workpiece is dry and carefully remove it from the mold. Let's wait a couple more days until it is completely dry and cut off the edges with a clerical knife.

Image
Image

Step 6

Then cover with black gouache or acrylic paint on the outside.

Then we will cover the outside and inside with a brush with polymer glue of the Prestige type. And the bowl for the cat is ready!

Recommended: