Buying a complex weave of eight straps, the novice owner does not really know what to do with them and how to put the harness on the dog correctly. The harness is a leash that is tied to a strap that passes over the upper chest.
Instructions
Step 1
If you have a very temperamental dog that will not allow you to put on a harness, you need to grab the dog's waist between your knees. At this time, correctly straighten the harness so that the soft part is inside.
Step 2
The first step is to put a closed ring on the dog's neck (the dimensions on the harness in the neck area may vary).
Step 3
Now you need to unfold the bridge (which connects the closed ring and the strap) so that it is located on the throat.
Step 4
Next, move the strap to the desired position, thereby limiting the space between the bridge and the closed ring.
Step 5
Slide the dog's front right paw into the space between the strap and the closed ring. Thus, it turns out that the bridge will pass through the chest, and the right paw will be clothed in a harness.
Step 6
Now there is one free end that needs to be inserted into the armpit of the left paw.
Step 7
Now you can fasten the strap. The dog needs to be put on its paws and the closed ring should be straightened around the neck so that it does not squeeze, but at the same time fits snugly around the dog's neck. Check the strap on your chest, it should lie flat.
Step 8
Try to tighten the strap tighter, otherwise the dog can easily wriggle out of the loosely fastened harness.
Step 9
Attach the leash to the carabiner, adjust the tension of the straps and you can safely go for a walk.
